Decompressing Bootloader................................. Speedtouch initialization sequence started. BOOTING THE THOMSON LINUX KERNEL Starting the kernel @ 0x801bc018 serial initialized Linux version 2.6.8.1 (debusb@cplx82.edegem.eu.thmulti.com) (gcc version 3.4.2) #1 Mon Nov 12 09:53:50 CET 2007 CPU revision is: 00029107 bcm63xx : initiazation of mpi bus ............... Determined physical RAM map: memory: 01f7d000 @ 00002000 (usable) On node 0 totalpages: 8063 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 3967 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=/dev/mtdblock1 rootfstype=squashfs brcm mips: enabling icache and dcache... Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB 2-way, linesize 16 bytes. PID hash table entries: 128 (order 7: 1024 bytes) Using 128.000 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 29968k/32244k available (1450k kernel code, 2232k reserved, 258k data, 68k init, 0k highmem) Calibrating delay loop... 251.39 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... available. NET: Registered protocol family 16 usbcore: registered new driver usbfs usbcore: registered new driver hub Bluetooth: Core ver 2.6 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher squashfs: LZMA suppport for slax.org by jro JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. bcm963xx_serial driver v2.0 Inotify sysfs create file = 0 Inotify sysfs create file = 0 Inotify sysfs create file = 0 inotify device minor=63 Using noop io scheduler Thomson BCM963xx flash mapping for BTHub flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. flash mapping initialized Creating 3 MTD partitions on "flash": 0x00040000-0x00100000 : "user" 0x001b0000-0x00800000 : "rootfs" 0x00100010-0x001b0000 : "kernel" mtd: partition "kernel" doesn't start on an erase block boundary -- force read-only Bluetooth: HCI UART driver ver 2.1 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized brcmboard: brcm_board_init entry ERROR - Invalid number of MAC addresses (1007714320) is configured. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 68k freed init started: BusyBox v1.00 (2007.11.12-09:05+0000) multi-call binary init started: BusyBox v1.00 (2007.11.12-09:05+0000) multi-call binary Starting pid 36, console /dev/ttyS0: '/etc/init.d/rcS' Algorithmics/MIPS FPU Emulator v1.5 Using /nmon/nmon.ko nmon: module license 'unspecified' taints kernel. Button: Character device registered successfully. *** OH G997Init: txIdle set to TRUE pSdramPHY=0xA1FFFFF8, 0x2FE05 0xDEADBEEF [BCM ADSL] Firmware load : 446280 446280 LMEM=(0xFFF00000, 54108) SDRAM=(0xA1FA0000, 392164) AdslCoreHwReset: AdslOemDataAddr = 0xA1FFE458 ADSL PHY version is A2pBT009a2.d18 b6w_init mpi: device 0x4318 found in PCI slot 1, function 0 wl: srom not detected, using main memory mapped srom info (wombo board) IPSecControl Character device registered successfully. NET: Registered protocol family 3 NET: Registered protocol family 9 NET: Registered protocol family 4 NET: Registered protocol family 5 NET: Registered protocol family 18 NET: Registered protocol family 25 SIOCSIFADDR: No such device killall: smbd: no process killed killall: nmbd: no process killed level: 24 ls: /var/usbmount: No such file or directory Using /lib/modules/2.6.8.1/kernel/drivers/usb/host/ohci-hcd.ko ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Enabling device 0000:00:09.0 (0000 -> 0002) ohci_hcd 0000:00:09.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:09.0 to 64 ohci_hcd 0000:00:09.0: irq 20, pci mem c0155b00 ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Using /lib/modules/2.6.8.1/kernel/drivers/usb/class/usblp.ko usblp: falsely claims to have parameter proto_bias usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Starting print_server modprobe: module printer.o not found. modprobe: failed to load module printer.o starting lpdsrv Mounting device Using /lib/modules/2.6.8.1/kernel/drivers/scsi/scsi_mod.ko SCSI subsystem initialized Using /lib/modules/2.6.8.1/kernel/drivers/scsi/sd_mod.ko Using /lib/modules/2.6.8.1/kernel/drivers/usb/storage/usb-storage.ko Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Using /lib/modules/2.6.8.1/kernel/fs/fat/fat.ko Using /lib/modules/2.6.8.1/kernel/fs/vfat/vfat.ko Using /lib/modules/2.6.8.1/kernel/fs/nls/nls_cp437.ko Using /lib/modules/2.6.8.1/kernel/fs/nls/nls_iso8859-1.ko usbmgr[280]: start 0.4.8 usbmgr[280]: sleep time -1 micro sec Name: /etc/usbmgr/usbmgr.conf Load_from_file: /etc/usbmgr/preload.conf killall: hciattach: no process killed Using /lib/modules/krtp.ko krtp ver 2.8 softdsp-vad-multiline-wb (Nov 12 2007 10:10:08) Copyright (C) 2004 Inventel Systemes Written 2004 by David Libault Written 2004 by Bruce Forgues Written 2004 by Eric Humbert usbmgr[282]: buffer line: remove T usbmgr[282]: class:0x9 subclass:0x0 protocol:0x0 usbmgr[282]: try /etc/usbmgr/class/09/00/00/module usbmgr[282]: try /etc/usbmgr/class/09/00/module usbmgr[282]: try /etc/usbmgr/class/09/module usbmgr[282]: try /etc/usbmgr/class/module Using /lib/modules/bt_reset.ko usbmgr[282]: USB device isn't matched the configuration Using /lib/modules/tty_spi.ko Console is free again MDG on CS0 MDG version: 1192-1, expect 1192-1 MDG Current Eeprom version : 51, expect 51 LOADER: Register timer for first check LOADER: Register SIGUSR1 - rescue LOADER: Register SIGUSR2 - broadcast alert LOADER: Register SIGHUP - test serial link with handset trough charger LOADER: Register HCI sniffer for Handset update request notifications Using /lib/modules/2.6.8.1/kernel/net/bluetooth/l2cap.ko Bluetooth: L2CAP ver 2.3 Bluetooth: L2CAP socket layer initialized Starting pid 333, console /dev/ttyS0: '/nmon/linux_appl.exe' ************* ERROR RECORD ************* 000000:00:00.000000 Application NMON started after POWERON. ****************** END ***************** appl_init: BUILD VERIFIED with the boardname WL firmwarecode (9-5-B0G0_9-6) WARNING: Unknown Parameter Type ipintf [adsl] trace = 5 0 [CWMP] NoIpTimeout must be minimum 120 s. Invalid option => Username :